www.kitcarecorp.com info@kitcarecorp.com 520 Call us today at 1-800-387-1858 or 416-243-3030 Emergency Lighting N12-EB6362 N12-EB6362HP EMERGENCY LIGHT BATTERY UNITS AIMLITE METAL EMERGENCY LIGHTS N12-EBST series of commercial steel battery units are designed to provide efficient and reliable emergency lighting. On higher capacity models, the cabinet front is sloped to allow better internal access and superior low angle light distribution. They are available in 6VDC, 12 VDC, and 24 VDC versions in a range of wattage capacities between 18 and 720 watts for 30 minute duration. PART# DESCRIPTION N12-EB636-2 6V, 36W, c/w 9W Heads 12 1/2” W x 10 3/8” H x 3” D, Includes 6V, 5 Ah Battery N12-EB636-2HP N12-EB6362, c/w 6V, GV 7.2 Ah Battery 12 1/2” W x 10 3/8” H x 3” D N12-EB672-2 12V, 72W, c/w 9W Heads 12 1/2” W x 10 3/8” H x 3” D N12-EB1272-2 12V, 72W, c/w 9W Heads 13 1/2” W x 14 5/8” H x 4 3/8” D N12-EB12100-2 12V, 100W, c/w 9W Heads 12 1/2” W x 10 3/8” H x 3” D N12-EB12160-2 12V, 160W, c/w 9W Heads 10” W x 13 1/2” H x 3 1/4” D N12-EB12200-2 12V, 200W, c/w 9W Heads 13 1/2” W x 14 5/8” H x 4 3/8” D N12-EB12360-2 12V, 360W, c/w 9W Heads 13” W x 14 5/8” H x 8 1/4” D PLASTIC EMERGENCY LIGHTS have the following standard features: PART# DESCRIPTION N12-1PLG 6V, 10.8W Light Complete w/ 3’ Cord 16 1/4" W x 5 1/8” H x 2 5/16” D N12-S1HRD 6V, 10.8W Light – Hard Wired 16 1/4" W x 5 1/8” H x 2 5/16" D N12-R2HRD 6V, 22 W Light – Hard Wired 16" W x 5 1/4" H x 2 5/16” D HARD WIRED OR JUST PLUG IT IN 31/2 FT. CORD FEATURES INCLUDE: • CSA C22.2 No. 141Certified • 120/347 VAC 60Hz input, filed selectable • Standard 9W PAR18 small style lamp heads, optional heads include PAR36 large style and MR16 available • 30 Minutes of emergency power • Momentary push button test switch • Complete with 6 Volt Battery • Diagnostic/pilot LEDS for AC ON and CHARGE • 120 VAC line cord supplied standard 31/2’ • 20 Gauge Steel Cabinet • Solid State design and construction • Brownout and short circuit protection FEATURES INCLUDE: • Injection molded, high-impact, thermoplastic housing • Universal mounting with “EZ” quick connect for easy installation • Push to test switch • Solid state charger • Battery Back-up • Universal voltage 120 or 277 VAC operation • Low voltage disconnect and power on LED indicator light • ULC listed (N12-1PLG, N12-S1MRD, N12-R2MRD) N12-1PLG W/CORD N12-S1HRD, N12-R2HRD – HARD WIRED N12-RMSM2 AIMLITE N12-RMSM series of commercial PAR18 REMOTE HEADS are constructed of UV stabilized, high impact thermoplastic and provide the perfect balance of value and performance. The heads are fully adjustable and both tilt and swivel are lockable. The standard canopy is designed to mount directly to typical electrical junction boxes. Available in 6V, 12V and 24V models, utilizing either tungsten (wedge based) or quartz halogen (bi-pin based) lamps. PART# DESCRIPTION N12-RMSM1-6V9W Single PAR18, Tungsten, 6V 9W N12-RMSM2-6V9W Double PAR18, Tungsten, 6V 9W N12-RMSM1-12V9W Single PAR18, Tungsten, 12V 9W N12-RMSM2-12V9W Double PAR18, Tungsten, 12V 9W N12-RMSM1-12V18W Single PAR18, Tungsten, 12V 18W N12-RMSM2-12V18W Single PAR18, Tungsten, 12V 18W N12-RMSM1-24V9W Single PAR18, Tungsten, 24V 9W N12-RMSM2-24V9W Double PAR18, Tungsten, 24V 9W